Conditional sea surface statistics and their impact on geophysical sea surface parameters retrieved from SAR altimetry signals

In this study we present an analytical formulation of synthetic-aperture radar (SAR) altimetry signals including narrow banded nonlinear wave fields and conditional statistics between wave elevation displacements, horizontal wave slopes and vertical wave particle velocities. Considering the wave elevation displacements coskewness with respect to horizontal slopes leads to an analytical formulation of the electromagnetic bias within a SAR-mode altimeter stack. This formulation can be either parametrized by the significant wave height (SWH) and mean wave steepness, or in terms of the variance of vertical wave velocities. The effect of conditional vertical wave particle velocity variances with respect to the observed horizontal wave slopes close to nadir incidence angles leads to an effective reduction of the azimuth blurring of SAR-mode stacks. We present here a formulation of this effect by examining JONSWAP ocean wave spectra. In most cases this effect reduces the azimuth blurring by 10% to 30%. Additionally we investigate the effect of a nonlinear wave elevation displacement probability density function (PDF) on estimated geophysical parameters. We were able to show that including an elevation displacement skewness of 0.13 improves significantly the SWH consistency between altimetry and ECMWF Reanalysis v5 ERA5 results.All of these effects are validated with respect to ERA5 model data in the North East Atlantic region and in situ data located in the German Bight and Baltic Sea.The developed model can be used in both SAR and conventional altimetry retrackers.     

上升段飞行器目标的视频图像跟踪

粒子滤波是一种基于贝叶斯估计理论和蒙特卡罗理论的实时目标跟踪方法，具有较为灵活的并行化跟踪方式，能够较好地维持跟踪目标的假设状态，具有较好的跟踪效果和鲁棒性。上升段飞行器目标飞行视频图像跟踪是火箭等目标飞行监控的重要阶段，但现阶段对飞行器上升段的视频图像跟踪主要依靠人工手动操作云台控制器，实现视频图像中的飞行器跟踪，跟踪图像存在跟踪滞后、画面抖动等现象，跟踪效果受人为因素影响较大。本文提出一种基于粒子滤波方法的上升段飞行器目标视频图像跟踪方法，建立飞行器目标粒子滤波跟踪模型实现对飞行器目标的识别和跟踪，在识别和跟踪的基础上建立云台控制模型，通过对云台的智能控制获得飞行器上升段的高质量图像。采用火箭发射的视频图像作为模型验证的实验数据，检验飞行器目标的跟踪效果。     

涡轮基组合循环发动机分布式控制系统通信网络混合拓扑结构优化方法

涡轮机组合循环(Turbine based combined cycle,TBCC)发动机控制系统通信网络拓扑结构是其分布式控制系统方案设计的重要部分,优化网络拓扑结构可提高发动机推重比和控制系统可靠性。本文基于智能优化算法提出TBCC分布式控制系统网络拓扑结构优化方法。基于图论建立TBCC几何模型和网格模型,以重量和可靠性为优化性能指标,同时考虑发动机表面高温区域以及控制节点的工作可靠性,分别采用粒子群算法和遗传算法优化星形结构中智能中央节点位置、中央节点的环形拓扑结构,获得星形-环形混合拓扑结构。仿真实例表明,基于本文方法优化所得的混合拓扑结构相较于星形集中式控制结构,系统重量降低了51.9%。     

稠密颗粒增强复合材料应变分布规律和刚度张量

针对高体积份数、随机分布、等轴状颗粒增强复合材料 ,研究了材料的应变分布规律 ,给出了基体和增强体应变平均值与材料微观结构参数之间的定量关系。结果表明 ,除应变平均值外 ,应变涨落是影响刚度张量的另一个重要因素 ,研究了应变涨落与材料微观结构参数之间的关系 ,并推导出了复合材料的刚度张量。与实验结果和以往的理论比较 ,预测结果与实验结果吻合良好     

Calculation of the transonic dip of airfoils using viscous-inviscid aerodynamic interaction method

A numerical procedure for the calculation of the transonic dip of airfoils in the time domain is presented. A viscous-inviscid aerodynamic interaction method is taken to calculate the unsteady aerodynamic loads. In the present case the integral boundary layer equations are coupled with the Transonic Small Disturbance (TSD) Potential Equation. The coupling between structural motion and aerodynamic loads is carried out using State Space equation. It is solved by State Transition Matrix technique. Results are presented for NACA 64A010 and NLR 7301 airfoils with structural data from Isogai and DLR, respectively. Comparisons show good agreement with other numerical results. Certain deviations of experimental data taken from literature need more insight in the detailed test conditions.     

Solar and Heliospheric Modulation of Galactic Cosmic Rays

The significance of external influences on the environment of Earth and its atmosphere has become evident during recent years. Especially, on time scales of several hundred years, the cosmogenic isotope concentration during the Wolf-, Spoerer-, Maunder- and Dalton-Minimum indicates an increased cosmic ray flux. Because these grand minima of solar activity coincide with cold periods, a correlation of the Earth climate with the cosmic ray intensities is plausible. Any quantitative study of the effects of energetic particles on the atmosphere and environment of the Earth must address their transport to Earth and their interactions with the Earth’s atmosphere including their filtering by the terrestrial magnetosphere. The first problem is one of the fundamental problems in modern cosmic ray astrophysics, and corresponding studies began in the 1960s based on Parker’s cosmic ray modulation theory taking into account diffusion, convection, adiabatic deceleration, and (later) the drift of energetic particles in the global heliospheric magnetic field. It is well established that all of these processes determining the modulation of cosmic rays are depending on parameters that are varying with the solar magnetic cycle. Therefore, the galactic cosmic ray intensities close to Earth is the result of a complex modulation of the interstellar galactic spectrum within the heliosphere. The modern view of this cosmic ray modulation is summarized in our contribution.     

非线性四阶微分方程两点边值问题解的存在唯一性

讨论了非线性四阶微分方程y(4)=f(x,y,y',y',y')的两点边值问题解的存在唯一性。其中,函数f在[a,b]×R4上连续,且满足Lipschitz条件。     

等质量异形粒子超高速撞击侵蚀

用数值方法模拟双锥，圆柱，椭球、圆锥和倒圆锥五类等质量异形铝粒子五种高宽比共２５种粒子对半无限铝靶的超高速撞击侵蚀，撞击速度为４ｋｍ／ｓ，给出了坑深、坑径、坑形参数和坑体积随粒子形状及高宽比的变化曲线。结果与非圆球异形粒子超高速撞击侵蚀计算有重要参考价值。     

褶皱结构成形时的形状偏差计算

解决了褶皱结构成形时相邻的平行四边形平面元素之间连接区棱的修圆半径值预测问题。把毛坯模拟成薄板，定义了平行四边形平面元素的边界条件，采用能量法导出挠度和力函数的非线性微分方程组，利用积分－差分法实现其数值解，并提供计算结果和分析应力－应变场。采用的计算方法可用于研究毛坯的刚度参数和工艺参数对褶皱结构的形状影响。     

EFFECT OF THE RIBLETS SURFACE ON THE BOUNDARY LAYER DEVELOPMENT

ＥＦＦＥＣＴ　ＯＦ　ＴＨＥ　ＲＩＢＬＥＴＳ　ＳＵＲＦＡＣＥ　ＯＮ　ＴＨＥ　ＢＯＵＮＤＡＲＹ　ＬＡＹＥＲ　ＤＥＶＥＬＯＰＭＥＮＴＷａｎｇＪｉｎｊｕｎ；ＬａｎＳｈｉｌｏｎｇ；ＬｉａｎＱｉｘｉａｎｇ（ＩｎｓｔｉｔｕｔｅｏｆＦｌｕｉｄＭｅｃｈａｎｉｃｓＩＢｅ...